| SPECIFICATIONS | FEATURES |
| PN: 25030 | Omega Bracket |
| 12-Volt / 24-Volt | Check Valve |
| Permanent Magnetic Motor | Vibration Isolators |
| Duty Cycle: 9% @ 100 PSI | Mounting Hardware |
| Max. Working Pressure: 120 PSI | Installation Instructions |
| Max. Air Tank Size: 1.0 Gallon | |
| Max. 12V Amp Draw: 10-Amps | |
| Max. 24V Amp Draw: 6-Amps | |
| Ingress Protection Rating: IP54 | |
| Max Ambient Temp: +158°F | |
| Min Ambient Temp: -40°F | |
| Dimensions: 5.4″L x 3.1″W x 4.6″H | |
| Net Weight: 2.55 lbs. |
| 12-VOLT COMPRESSOR PERFORMANCE- Supply Voltage 13.8 Volts | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.03 | 7 | 0 | 29.0 | 7 |
| 10 | 0.71 | 8 | 1.0 | 19.0 | 8 |
| 20 | 0.67 | 8 | 2.0 | 18.0 | 9 |
| 30 | 0.64 | 9 | 3.0 | 16.5 | 9 |
| 40 | 0.60 | 9 | 4.0 | 15.0 | 10 |
| 50 | 0.57 | 9 | 5.0 | 13.5 | 10 |
| 60 | 0.53 | 10 | 6.0 | 12.5 | 10 |
| 70 | 0.48 | 10 | 7.0 | 11.0 | 10 |
| 80 | 0.45 | 10 | 8.0 | 10.0 | 9 |
| 90 | 0.43 | 10 | |||
| 100 | 0.39 | 9 | |||
| 110 | 0.36 | 9 | |||
| 120 | 0.34 | 9 | |||
| 24-VOLT COMPRESSOR PERFORMANCE- Supply Voltage 28 Volts | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.03 | 4 | 0 | 29.0 | 4 |
| 10 | 0.71 | 4 | 1.0 | 19.0 | 4 |
| 20 | 0.67 | 4 | 2.0 | 18.0 | 4 |
| 30 | 0.64 | 4 | 3.0 | 16.5 | 5 |
| 40 | 0.60 | 5 | 4.0 | 15.0 | 5 |
| 50 | 0.57 | 5 | 5.0 | 13.5 | 5 |
| 60 | 0.53 | 5 | 6.0 | 12.5 | 5 |
| 70 | 0.48 | 5 | 7.0 | 11.0 | 5 |
| 80 | 0.45 | 5 | 8.0 | 10.0 | 5 |
| 90 | 0.43 | 5 | |||
| 100 | 0.39 | 5 | |||
| 110 | 0.36 | 5 | |||
| 120 | 0.34 | 5 | |||
| 12-VOLT COMPRESSOR FILL RATES | |
| 0.5 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 1 min. 08 sec. (± 05 sec.) |
| 85 to 105 PSI | 16 sec. (± 03 sec.) |
| 0 to 120 PSI | 1 min. 23 sec. (± 05 sec.) |
| 90 to 120 PS | 27 sec. (± 03 sec.) |
| 1.0 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 2 min. 20 sec. (± 10 sec.) |
| 85 to 105 PSI | 35 sec. (± 05 sec.) |
| 0 to 120 PSI | 3 min. 04 sec. (± 10 sec.) |
| 90 to 120 PSI | 54 sec. (± 05 sec.) |
| 24-VOLT COMPRESSOR FILL RATES | |
| 0.5 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 1 min. 08 sec. (± 05 sec.) |
| 85 to 105 PSI | 16 sec. (± 03 sec.) |
| 0 to 120 PSI | 1 min. 23 sec. (± 05 sec.) |
| 90 to 120 PS | 27 sec. (± 03 sec.) |
| 1.0 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 2 min. 20 sec. (± 10 sec.) |
| 85 to 105 PSI | 35 sec. (± 05 sec.) |
| 0 to 120 PSI | 3 min. 04 sec. (± 10 sec.) |
| 90 to 120 PSI | 54 sec. (± 05 sec.) |
PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
250H 120PSI/1.25CFM
The 250H is a light duty air compressor for smaller pneumatic requirements. It's designed to fill no larger than a 1 gallon tank, features an omega bracket, check valve and is available in 12 or 24-volt.
