| SPECIFICATIONS | FEATURES |
| PN: 65030 | Thermal Overload Protector |
| 12-Volt | Check Valve |
| Permanent Magnetic Motor | Vibration Isolators |
| Duty Cycle: 100% @ 100 PSI | Mounting Hardware |
| Max. Working Pressure: 150 PSI | Stainless Steel Braided Leader Hose |
| Max. Air Tank Size: 5.0 Gallon | Air Line for Remote Mount Air Filter |
| Max. 12V Amp Draw: 23-Amps | Remote Mount Air Filter Assembly |
| Ingress Protection Rating: IP67 | (2) Replacement Air Filter Elements |
| Max Ambient Temp: +158°F | Installation Instructions |
| Min Ambient Temp: -40°F | |
| Dimensions: 10.6″L x 4″W x 6.87″H | |
| Net Weight: 10.80 lbs. |
| 12-VOLT COMPRESSOR PERFORMANCE- Supply Voltage 13.8 Volts | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.80 | 12 | 0 | 51.0 | 12 |
| 10 | 1.75 | 14 | 1.0 | 47.6 | 15 |
| 20 | 1.60 | 16 | 2.0 | 43.3 | 17 |
| 30 | 1.52 | 17 | 3.0 | 38.2 | 18 |
| 40 | 1.39 | 18 | 4.0 | 34.0 | 19 |
| 50 | 1.27 | 19 | 5.0 | 30.5 | 20 |
| 60 | 1.18 | 19 | 6.0 | 28.1 | 21 |
| 70 | 1.09 | 20 | 7.0 | 26.4 | 22 |
| 80 | 1.04 | 20 | 8.0 | 25.0 | 23 |
| 90 | 0.97 | 21 | 9.0 | 23.0 | 22 |
| 100 | 0.94 | 22 | 10.0 | 21.0 | 21 |
| 110 | 0.90 | 23 | |||
| 120 | 0.86 | 23 | |||
| 130 | 0.81 | 22 | |||
| 140 | 0.76 | 21 | |||
| 150 | 0.72 | 20 | |||
| 12-VOLT COMPRESSOR FILL RATES | |
| 2.5 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 1 min. 55 sec. (± 10 sec.) |
| 85 to 105 PSI | 28 sec. (± 05 sec.) |
| 0 to 145 PSI | 3 min. 02 sec. (± 10 sec.) |
| 110 to 145 PS | 59 sec. (± 05 sec.) |
| 5.0 GALLON TANK | FILL RATE |
| 0 to 105 PSI | 4 min. (± 10 sec.) |
| 85 to 105 PSI | 58 sec. (± 05 sec.) |
| 0 to 145 PSI | 6 min. 25 sec. (± 15 sec.) |
| 110 to 145 PSI | 2 min. 11 sec. (± 10 sec.) |
PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
650H 150PSI/1.80CFM
The 650H is a continuous duty cycle air compressor, meaning it can run continuously for 1-hour before needing rest. Features include a standard 1/4” NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation.
