| SPECIFICATIONS | FEATURES |
| CFM: 2.62 @ 0 PSI | 600H Compressor w/Thermal Overload Protector |
| 12-Volt | 0.25 Gallon Extruded Aluminum Air Tank (12-port) |
| Permanent Magnetic Motor |
Pre-installed Safety Valve |
| Duty Cycle: 33% @ 100 PSI |
Pre-installed 1/8” NPT Drain Cock |
| Max. Working Pressure: 150 PSI |
Pre-installed 85/105 PSI Pressure Switch |
| Max. 12V Amp Draw: 30-Amps |
(8) Pre-installed 1/4” NPT Recessed Port Plugs |
| Ingress Protection Rating: IP67 |
Pre-installed Quick Connect Coupler |
| Max Ambient Temp: +158°F |
40-Amp Relay |
| Min Ambient Temp: -40°F |
(2) 1/4” NPT to 1/8” BSP Adapters |
| Dimensions: 9″L x 4″W x 6.75″H |
1/4” NPT M Barbed Fitting for 3/8” Air Line |
| Net Weight: 10 lbs. |
1/4” NPT F Barbed Fitting for 3/8” Air Line |
|
Coiled Air Line (For Remote Mount Air Filter Installation) |
|
|
Air Filter Housing |
|
|
(2) Replacement Air Filter Elements |
|
|
Mounting Hardware |
| 12-VOLT COMPRESSOR PERFORMANCE- Supply Voltage 13.8 Volts | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 2.62 | 15 | 0 | 74.0 | 16 |
| 10 | 2.39 | 18 | 1.0 | 65.0 | 20 |
| 20 | 2.21 | 20 | 2.0 | 60.0 | 23 |
| 30 | 2.11 | 22 | 3.0 | 56.0 | 25 |
| 40 | 2.01 | 24 | 4.0 | 53.0 | 27 |
| 50 | 1.93 | 25 | 5.0 | 49.0 | 28 |
| 60 | 1.84 | 26 | 6.0 | 46.0 | 28 |
| 70 | 1.73 | 27 | 7.0 | 42.0 | 28 |
| 80 | 1.65 | 27 | 8.0 | 38.0 | 28 |
| 90 | 1.52 | 27 | 9.0 | 35.0 | 27 |
| 100 | 1.45 | 27 | 10.0 | 31.0 | 27 |
| 110 | 1.35 | 27 | |||
| 120 | 1.26 | 27 | |||
| 130 | 1.19 | 27 | |||
| 140 | 1.08 | 27 | |||
| 150 | 1.01 | 26 | |||
| 12-VOLT COMPRESSOR FILL RATES | |
| 31" X 10.5" | FILL RATE |
| 0 to 30 PSI | 3 min. (± 10 sec.) |
| 15 to 30 PSI | 1 min. 35 sec. (± 05 sec.) |
| 33" X 12.5" | FILL RATE |
| 0 to 30 PSI | 4 min. 20 sec. (± 10 sec.) |
| 15 to 30 PSI | 2 min. 05 sec. (± 05 sec.) |
| 35" X 12.5" | FILL RATE |
| 0 to 30 PSI | 5 min. 20 sec. (± 15 sec.) |
| 15 to 30 PSI | 2 min. 45 sec. (± 10 sec.) |
PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
600HT 150PSI/2.62CFM
Automatic Deployment Air (ADA) Systems as a base model kit, delivering incredible performance in a compact space. VERBAIR ADA Base Model Kits incorporate a 12-port extruded aluminum air tank to provide a compact air locker and tire inflation station using a 600H (Heavy Duty) compressor at its core.
