| SPECIFICATIONS | FEATURES |
| CFM: 1.86 @ 0 PSI |
680H Pewter Air Compressor |
| 12-Volt | Thermal Overload Protector |
| Permanent Magnetic Motor |
2.0 Gallon Air Tank |
| Duty Cycle: 100% @ 100 PSI (50% @ 200 PSI) |
Pressure Switch (165 PSI On / 200 PSI Off) |
| Max. Working Pressure: 200 PSI |
Safety Valve (250 PSI) |
| Max. 12V Amp Draw: 23-Amps |
Drain Cock |
| Ingress Protection Rating: IP67 |
Leader Hose with Check Valve |
| Max Ambient Temp: +158°F | |
| Min Ambient Temp: -40°F | |
| Dimensions: 19.7″L x 5.9″W x 13.9″H | |
| Net Weight: 22.95 lbs. |
| 12-VOLT COMPRESSOR PERFORMANCE- Supply Voltage 13.8 Volts | |||||
| PSI | CFM | A | BAR | LPM | A |
| 0 | 1.86 | 10 | 0 | 52.7 | 10 |
| 10 | 1.75 | 12 | 1.0 | 47.5 | 13 |
| 20 | 1.59 | 14 | 2.0 | 43.2 | 15 |
| 30 | 1.52 | 15 | 3.0 | 40.7 | 16 |
| 40 | 1.45 | 16 | 4.0 | 38.1 | 18 |
| 50 | 1.41 | 17 | 5.0 | 35.3 | 18 |
| 60 | 1.33 | 18 | 6.0 | 32.6 | 19 |
| 70 | 1.26 | 18 | 7.0 | 30.0 | 20 |
| 80 | 1.20 | 19 | 8.0 | 27.0 | 22 |
| 90 | 1.13 | 19 | 9.0 | 25.0 | 22 |
| 100 | 1.07 | 20 | 10.0 | 22.3 | 21 |
| 110 | 0.99 | 21 | 11.0 | 20.1 | 21 |
| 120 | 0.93 | 23 | 12.0 | 18.3 | 21 |
| 130 | 0.88 | 22 | 13.0 | 16.0 | 20 |
| 140 | 0.82 | 22 | 14.0 | 14.0 | 19 |
| 150 | 0.75 | 21 | |||
| 160 | 0.71 | 21 | |||
| 170 | 0.67 | 21 | |||
| 180 | 0.61 | 21 | |||
| 190 | 0.55 | 20 | |||
| 200 | 0.51 | 19 | |||
| 12-VOLT COMPRESSOR FILL RATES | |
| 2.0 GALLON TANK | FILL RATE |
| 0 to 200 PSI | 3 min. 56 sec. (± 10 sec.) |
| 165 to 200 PSI | 1 min. 02 sec. (± 05 sec.) |
PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
680HG 200PSI/1.86CFM
High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 680H VERBAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8″ (I.D.) air line pre-installed!
